A Southwest Airlines Boeing 737 Max 8 jet, operating as Flight 746 from Phoenix to Oakland, encountered a harrowing incident known as a Dutch roll on May 25, resulting in “substantial” damage to its tail section. The aircraft, registered as N8825Q, was flying at approximately 34,000 feet when the maneuver occurred, causing concern and prompting a detailed investigation by aviation authorities.
The Dutch roll, a rarely seen aerodynamic phenomenon in commercial aviation, involves a combination of yaw (side-to-side movement) and roll (tilting) motions. Ken Byrnes, an expert from Embry-Riddle Aeronautical University, described it as an oscillatory motion where the aircraft’s lateral and directional dynamics become unbalanced. This instability can stress the fuselage and potentially lead to structural damage, underscoring the severity of the incident experienced by Flight 746.
Despite the damage sustained to the tail section, specifically the rudder’s standby power control unit (PCU), the aircraft managed to complete its journey safely. The extent of the damage was only discovered during a post-flight inspection, prompting Southwest Airlines to swiftly return the jet to Boeing’s facilities for assessment and repairs starting on June 6.
The Federal Aviation Administration (FAA) and the National Transportation Safety Board (NTSB) have launched a joint investigation into the incident, emphasizing the collaborative effort between regulatory bodies and the aircraft manufacturer. The NTSB reported that initial findings from the airplane’s digital flight data recorder have been retrieved, while the cockpit voice recorder unfortunately did not capture relevant data due to recording limitations.
“Dutch rolls are unusual in commercial aviation due to aircraft design and safety systems in place,” explained Byrnes. “Most large aircraft are equipped with yaw dampeners designed to automatically counteract such movements if they occur.”
The incident serves as a reminder of the rigorous safety protocols and continuous monitoring required in aviation, particularly concerning unexpected aerodynamic challenges. While Dutch rolls are infrequent in commercial flights, their potential impact on aircraft integrity necessitates thorough investigation and preventive measures.
Southwest Airlines deferred inquiries regarding the incident to the FAA and NTSB, both of which are expected to issue preliminary findings within the next 30 days. This scrutiny aligns with recent legislative mandates requiring enhanced flight data recording capabilities to facilitate comprehensive accident investigations.
As aviation experts analyze data and conduct further assessments, the industry remains focused on maintaining the highest standards of safety and operational integrity to safeguard passengers and crew during every phase of flight.




